Heavy Duty Industrial Racking Systems
Steel Material Grade
Q355B High-Yield Cold-Formed Steel
Standard Dimensions
2 to 6 Pallets Deep, Up to 12m Heights
Protective Finish
Corrosion-Resistant Electrostatic Powder Coat
Engineering Codes
FEM 10.2.02 / RMI 2012 / ISO 9001
High-Density Dynamic LIFO Storage
Bodor Rack Industries Push-Back Racking systems offer dynamic pallet storage on nested wheeled carts that ride along inclined structural steel rails. As a new pallet is loaded, it gently pushes back previous pallets. Ideal for high-density warehouse storage with multiple pallets per SKU.
Key Engineering Features:
- Supports 500 kg to 1,500 kg per pallet position across 2, 3, 4, 5, or 6 deep configurations.
- Eliminates dedicated forklift drive-in lanes, boosting floor utilization by up to 75%.
- Heavy-duty sealed bearing steel wheels ensure smooth glide with zero pallet hang-ups.
- Certified compliant with ANSI/RMI MH16.1 and FEM 10.2.02 racking codes.
Quality Assurance Guarantees:
Robotic MIG/MAG seam welding with 100% penetration
Positive spring locking safety pins on all connectors
High-capacity seismic floor baseplates with expansion anchors
Automated 7-stage chemical wash pretreatment before powder coat
Manufacturing & Structural Tolerances
| Raw Material Steel Grade | Q355B / Q235B High-Yield Cold-Formed Structural Steel |
|---|---|
| Yield Strength Limit | Minimum 355 MPa (51,500 psi) guaranteed yield point |
| Upright Profile Geometry | 90mm - 140mm roll-formed omega profile with stiffening ribs |
| Length Tolerance | Strict dimensional tolerance within ±0.5 mm per bay height |
| Beam Deflection Ratio | Engineered below L/200 under maximum rated payload (zero sag) |
| Connector Endplates | 3-claw and 4-claw heavy forged claw brackets with safety pins |
| Finish Cure Temperature | Electrostatic polyester powder cured at 200°C for lifetime adhesion |
10-Year Comprehensive Structural Warranty
Backed directly by Bodor Rack Industries Ltd. Plant EngineeringAll structural steel upright columns, box beams, cantilever arms, and seismic baseplates are warranted against structural failure, material defects, or weld separation for a period of ten (10) full years from completion of installation when operated within engineered load ratings.
Annual structural inspection and laser alignment calibration audits are available through our nationwide field engineering division.
Related Systems in Heavy Duty Industrial Racking Systems
View Full Category ➔
Heavy Duty Industrial Racking Systems
Mezzanine & Multi Tier Rack
2, 3 & 4 Tier Levels (Height 3m - 12m)
Heavy Duty Industrial Racking Systems
Drive-In Rack
Lanes 2 - 12 Pallets Deep, Heights up to 14m
Heavy Duty Industrial Racking Systems
Double Deep Rack
2 Pallets Deep per Bay, Heights up to 14.5m
Heavy Duty Industrial Racking Systems
Shelving Rack
Shelf Width 1.2m - 2.4m, Depths 400 - 1000mm