Warehouse Racking Systems
Steel Material Grade
Certified Q235B & Q355B High-Tensile Structural Steel
Standard Dimensions
Turnkey Warehouse Floor Layouts up to 35m High
Protective Finish
Dual-Cure Electrostatic Epoxy Powder Coat
Engineering Codes
FEM 10.2.02 / RMI 2012 / ISO 9001
Comprehensive Warehouse Storage Infrastructure
Turnkey engineered racking infrastructure including selective pallet racks, narrow aisle VNA layouts, high-bay clad racks, and drive-in systems manufactured to ISO 9001 and FEM 10.2 standards.
Key Engineering Features:
- Engineered 3D CAD blueprints tailored to maximize warehouse cubic storage volume.
- FEA finite element stress testing certifies zero deflection under full design loads.
- Turnkey delivery including laser column alignment, anchor drilling, and certified inspection.
- Full 10-Year manufacturer structural warranty on all steel uprights and beams.
Quality Assurance Guarantees:
Robotic MIG/MAG seam welding with 100% penetration
Positive spring locking safety pins on all connectors
High-capacity seismic floor baseplates with expansion anchors
Automated 7-stage chemical wash pretreatment before powder coat
Manufacturing & Structural Tolerances
| Raw Material Steel Grade | Q355B / Q235B High-Yield Cold-Formed Structural Steel |
|---|---|
| Yield Strength Limit | Minimum 355 MPa (51,500 psi) guaranteed yield point |
| Upright Profile Geometry | 90mm - 140mm roll-formed omega profile with stiffening ribs |
| Length Tolerance | Strict dimensional tolerance within ±0.5 mm per bay height |
| Beam Deflection Ratio | Engineered below L/200 under maximum rated payload (zero sag) |
| Connector Endplates | 3-claw and 4-claw heavy forged claw brackets with safety pins |
| Finish Cure Temperature | Electrostatic polyester powder cured at 200°C for lifetime adhesion |
10-Year Comprehensive Structural Warranty
Backed directly by Bodor Rack Industries Ltd. Plant EngineeringAll structural steel upright columns, box beams, cantilever arms, and seismic baseplates are warranted against structural failure, material defects, or weld separation for a period of ten (10) full years from completion of installation when operated within engineered load ratings.
Annual structural inspection and laser alignment calibration audits are available through our nationwide field engineering division.
Related Systems in Warehouse Racking Systems
View Full Category ➔
Heavy Duty Industrial Racking Systems
Push Back Rack
2 to 6 Pallets Deep, Up to 12m Heights
Heavy Duty Industrial Racking Systems
Mezzanine & Multi Tier Rack
2, 3 & 4 Tier Levels (Height 3m - 12m)
Heavy Duty Industrial Racking Systems
Drive-In Rack
Lanes 2 - 12 Pallets Deep, Heights up to 14m
Heavy Duty Industrial Racking Systems
Double Deep Rack
2 Pallets Deep per Bay, Heights up to 14.5m