Heavy Duty Industrial Racking Systems
Steel Material Grade
Q355B Structural Steel Box Beams
Standard Dimensions
Standard Euro & US Pallet Dimensions (Custom Heights)
Protective Finish
Impact-Resistant Powder Coat (Safety Orange / Dark Blue)
Engineering Codes
FEM 10.2.02 / RMI 2012 / ISO 9001
Custom Engineered Industrial Pallet Racks
Precision-fabricated pallet rack frames and beams configured to match non-standard warehouse column grids, sprinkler heads, and high-density material handling workflows.
Key Engineering Features:
- Engineered specifically around your exact pallet footprint (48x40, 1200x1000, 1200x800).
- Ultrasonic verified continuous robotic welds on beam connector endplates.
- Integrated upright column protectors and wrap-around corner post shields.
- Accommodates heavy wire mesh decking, timber slat inserts, and pallet support bars.
Quality Assurance Guarantees:
Robotic MIG/MAG seam welding with 100% penetration
Positive spring locking safety pins on all connectors
High-capacity seismic floor baseplates with expansion anchors
Automated 7-stage chemical wash pretreatment before powder coat
Manufacturing & Structural Tolerances
| Raw Material Steel Grade | Q355B / Q235B High-Yield Cold-Formed Structural Steel |
|---|---|
| Yield Strength Limit | Minimum 355 MPa (51,500 psi) guaranteed yield point |
| Upright Profile Geometry | 90mm - 140mm roll-formed omega profile with stiffening ribs |
| Length Tolerance | Strict dimensional tolerance within ±0.5 mm per bay height |
| Beam Deflection Ratio | Engineered below L/200 under maximum rated payload (zero sag) |
| Connector Endplates | 3-claw and 4-claw heavy forged claw brackets with safety pins |
| Finish Cure Temperature | Electrostatic polyester powder cured at 200°C for lifetime adhesion |
10-Year Comprehensive Structural Warranty
Backed directly by Bodor Rack Industries Ltd. Plant EngineeringAll structural steel upright columns, box beams, cantilever arms, and seismic baseplates are warranted against structural failure, material defects, or weld separation for a period of ten (10) full years from completion of installation when operated within engineered load ratings.
Annual structural inspection and laser alignment calibration audits are available through our nationwide field engineering division.
Related Systems in Heavy Duty Industrial Racking Systems
View Full Category ➔
Heavy Duty Industrial Racking Systems
Push Back Rack
2 to 6 Pallets Deep, Up to 12m Heights
Heavy Duty Industrial Racking Systems
Mezzanine & Multi Tier Rack
2, 3 & 4 Tier Levels (Height 3m - 12m)
Heavy Duty Industrial Racking Systems
Drive-In Rack
Lanes 2 - 12 Pallets Deep, Heights up to 14m
Heavy Duty Industrial Racking Systems
Double Deep Rack
2 Pallets Deep per Bay, Heights up to 14.5m