Cable Tray
Steel Material Grade
Continuous Hot-Dip Galvanized / Pre-Galvanized Steel Sheet
Standard Dimensions
Widths 50mm - 900mm, Flange Heights 50 - 150mm, Length 3.0m
Protective Finish
Hot-Dip Galvanized to ISO 1461 (Zero Rust)
Engineering Codes
FEM 10.2.02 / RMI 2012 / ISO 9001
Heavy Industrial Ladder & Perforated Cable Tray Systems
Engineered cable management infrastructure for industrial manufacturing plants, electrical substations, data centers, and chemical refineries. Provides safe, organized routing of heavy high-voltage cables.
Key Engineering Features:
- Available in Perforated Cable Tray, Cable Ladder, and Solid Bottom Channel configurations.
- Hot-dip galvanized coating provides 25+ years of corrosion resistance in aggressive industrial atmospheres.
- Complete accessory suite: bends, risers, tees, cross junctions, couplers, and heavy ceiling trapeze hangers.
- Certified compliance with NEMA VE-1 and IEC 61537 standards for cable containment.
Quality Assurance Guarantees:
Robotic MIG/MAG seam welding with 100% penetration
Positive spring locking safety pins on all connectors
High-capacity seismic floor baseplates with expansion anchors
Automated 7-stage chemical wash pretreatment before powder coat
Manufacturing & Structural Tolerances
| Raw Material Steel Grade | Q355B / Q235B High-Yield Cold-Formed Structural Steel |
|---|---|
| Yield Strength Limit | Minimum 355 MPa (51,500 psi) guaranteed yield point |
| Upright Profile Geometry | 90mm - 140mm roll-formed omega profile with stiffening ribs |
| Length Tolerance | Strict dimensional tolerance within ±0.5 mm per bay height |
| Beam Deflection Ratio | Engineered below L/200 under maximum rated payload (zero sag) |
| Connector Endplates | 3-claw and 4-claw heavy forged claw brackets with safety pins |
| Finish Cure Temperature | Electrostatic polyester powder cured at 200°C for lifetime adhesion |
10-Year Comprehensive Structural Warranty
Backed directly by Bodor Rack Industries Ltd. Plant EngineeringAll structural steel upright columns, box beams, cantilever arms, and seismic baseplates are warranted against structural failure, material defects, or weld separation for a period of ten (10) full years from completion of installation when operated within engineered load ratings.
Annual structural inspection and laser alignment calibration audits are available through our nationwide field engineering division.
Related Systems in Cable Tray
View Full Category ➔
Heavy Duty Industrial Racking Systems
Push Back Rack
2 to 6 Pallets Deep, Up to 12m Heights
Heavy Duty Industrial Racking Systems
Mezzanine & Multi Tier Rack
2, 3 & 4 Tier Levels (Height 3m - 12m)
Heavy Duty Industrial Racking Systems
Drive-In Rack
Lanes 2 - 12 Pallets Deep, Heights up to 14m
Heavy Duty Industrial Racking Systems
Double Deep Rack
2 Pallets Deep per Bay, Heights up to 14.5m