Industrial Furniture
Steel Material Grade
Q235B High-Yield Structural Steel
Standard Dimensions
1200 x 1000 x 125 mm / 1200 x 800 mm (4-Way Entry)
Protective Finish
Hot-Dip Galvanized or Cured Industrial Enamel
Engineering Codes
FEM 10.2.02 / RMI 2012 / ISO 9001
Heavy-Duty Reusable Steel Warehouse Pallets
Engineered to replace fragile wooden and plastic pallets in heavy metallurgy, chemical, cold storage, and automotive supply chains. Zero splinters, fireproof, and 100% recyclable.
Key Engineering Features:
- Dynamic load rating: 2,000 kg; Static load rating: up to 6,000 kg.
- Full 4-way entry compatible with counterbalanced forklifts, reach trucks, and pallet jacks.
- Fireproof and hygienic: ideal for chemical hazardous zones and automated AS/RS systems.
- Corrosion-resistant galvanized coating ensures 15+ years of maintenance-free service.
Quality Assurance Guarantees:
Robotic MIG/MAG seam welding with 100% penetration
Positive spring locking safety pins on all connectors
High-capacity seismic floor baseplates with expansion anchors
Automated 7-stage chemical wash pretreatment before powder coat
Manufacturing & Structural Tolerances
| Raw Material Steel Grade | Q355B / Q235B High-Yield Cold-Formed Structural Steel |
|---|---|
| Yield Strength Limit | Minimum 355 MPa (51,500 psi) guaranteed yield point |
| Upright Profile Geometry | 90mm - 140mm roll-formed omega profile with stiffening ribs |
| Length Tolerance | Strict dimensional tolerance within ±0.5 mm per bay height |
| Beam Deflection Ratio | Engineered below L/200 under maximum rated payload (zero sag) |
| Connector Endplates | 3-claw and 4-claw heavy forged claw brackets with safety pins |
| Finish Cure Temperature | Electrostatic polyester powder cured at 200°C for lifetime adhesion |
10-Year Comprehensive Structural Warranty
Backed directly by Bodor Rack Industries Ltd. Plant EngineeringAll structural steel upright columns, box beams, cantilever arms, and seismic baseplates are warranted against structural failure, material defects, or weld separation for a period of ten (10) full years from completion of installation when operated within engineered load ratings.
Annual structural inspection and laser alignment calibration audits are available through our nationwide field engineering division.
Related Systems in Industrial Furniture
View Full Category ➔
Industrial Furniture
Cutting Table
Standard 2400 x 1200 x 900 mm (Custom Built to Spec)
Industrial Furniture
Packing Table
1800 x 900 x 850 mm (Adjustable Working Height)
Industrial Furniture
Centre Table
1500 x 900 x 800 mm (Heavy Floor Mounting)
Industrial Furniture
QC Table
1800 x 800 x 850 mm with Overhead Lighting